Depending on the cabinet you have ordered, the box contains a number of upright panels and a number of horizontal shelves. You will also have received oak pins to secure the shelves in place.

Download the Column cabinet manual as a PDF here


1. Check that every part of the Column cabinet you ordered is in your package.


2. Stand the upright panels on their edge as shown in the drawing above. Make sure the slots for the shelves point towards the ceiling (place something soft underneath the panels).


3. Slide the first horizontal shelf into the slots provided; do this slowly and carefully to avoid unnecessary scratches.


4. Fit the other shelves as described in step 3.


5. Make sure all the shelves sit squarely in the frames. You can now start inserting the oak pins into the holes provided.


6. Slide the oak pins into the holes, following the illustration above closely. You don't need a hammer to fit the pins – simply push each pin through with your thumb.


7. Once all the oak pins are in place, you can carefully stand the cabinet upright and move it to the desired spot.


8. Make sure the cabinet stands stably by adjusting the levelling feet. The levelling feet are on the underside of the vertical panels.


9. Fix the cabinet to the wall using the keyholes at the back of the cabinet. For this step you will need screws and wall plugs suitable for your wall.


10. Your new Column Cabinet is ready to use. Enjoy!